Here isCrane Rail China Manufacturertalking about Wheel Fatigue Test.

　　If you have any idea aboutChina Crane Rail, welcome to contact us and discuss.

　　For the fatigue test of the wheel, there are currently two domestic test methods.

　　The first typeis a fatigue test of a single wheel using a structural fatigue test rig, which is placed flat on the test rig with the rim side facing up and the outer rim supported by two points, applying a pulsating load on the inner hub end face. This method is simple and easy, except that the wheel has a large difference between the force state and the actual application.

　　The second methodis to use the entire wheel pair on the wheelset test bench. Thetrack wheelof the test bench drives the test wheel pair to rotate, and the vertical load is applied to the axle journal, but the lateral load is difficult to apply. The inadequacies of this test method are also difficult to apply to higher values even for vertical loads due to the bearing life and load carrying capacity of the test bench.

　　For more information aboutCrane Rail Suppliers, please contactsales@yyrail.comor call us.