1.Rail clipisn't in the right place, does it'll have influence?

　　If the rail clip isn't at the ideal place, it will reduce the service life and change the shape. So we must pay attention to that the rail clip must install in the place where far away into the Embedded iron tower ~10mm.

　　2. The way to resolve the mental rail clips have been corroded?

　　Firstly, we need to know that will get the rail screw torque increased. Pay additional attention to the procedure of transforming and installing. Don't disassemble repeatedly. Oiling and painting the rust site punctually.

　　3. The gap between rail gauge steel and block railing is more than 1mm, is that right?

　　It will influence the rail gauge then threaten the train safety. You need to change the suitable rail gauge block at once.

　　4. The gap between the rail clip central front jaw along with the railing insulator is greater than 0.5mm, the best way to solve it?

　　When the gap is greater than 0.5mm, the torque of the rail clip will considerably smaller compare to the normal rail clip and the crimping force is going to be reduced. So please fix the rail clip to ensure the gap is smaller than 0.5mm.

　　We specialize in the production of variousrailway track fasteners, we also have the15kg steel railfactory, which can supply you in large quantities.